Skip to content
Power Supply Circuits

±12V Dual Power Supply Using Zener Diodes - DIY

2 min read20,535 views
PublishedUpdated
±12V Dual Power Supply

±12V Dual Power Supply is essential for electronic hobbyists & technologists nowadays. They provide a simple, easy & cheap source of a reliable DC supply. So, in this project, we are going to design a simple ±12V dual power supply using 12V/1W Zener diodes.

A Zener diode is a silicon semiconductor device that permits current to flow in either a forward or reverse direction. The Zener diode consists of a special, heavily doped p-n junction, designed to conduct in the reverse direction when a certain specified voltage is reached. Zener diode has a precise reverse-breakdown voltage, at which it starts conducting current, and continues operating continuously in the reverse-bias mode without receiving any damage.

1N5349B 12V 5W Zener diode

Bill of Materials (BOM)

The following components are required to make 12V Dual Power Supply Circuit

ComponentValue / Part No.Qty
Step-down Transformer230V/15V1
Zener Diodes12V/1W2
Diodes1N40014
Capacitor250uF1
Resistors150 Ohm1
Breadboard-1
Connecting Wires-1

±12V Dual Power Supply Circuit

12 volt dual power supply circuit

Working Explanation

The main component of this circuit is a 12V/1W Zener Diode. Here, the Zener diode is behaving as a voltage regulator. An input voltage of 230V is applied at the primary of the transformer which steps it down to 15V through mutual induction of the primary & secondary windings while maintaining the frequency at 50Hz. After which the 15V AC signal goes through a bridge rectifier (4x 1N4001 Diodes) which converts the AC signal into a rippling DC signal.

The output DC signal then goes through a 250uF smoothing capacitor in order to remove any residual noise. The DC signal then goes through 2 Zener diodes producing a regulated ±12V each. The property to have a constant voltage in the breakdown region enables Zener diodes to serve as a useful voltage regulator for low current uses.

Applications

  • A Dual DC power supply can serve in applications such as applying a variable voltage to low-power DC motors.
  • Commonly used in the testing of small electronic projects such as small DIY projects.
Download this projectCircuit diagram, parts list, wiring and code in one printable document.

Share this project

Discussion

Be the first to comment

More projects you might like

More in Power Supply Circuits