UC3525A is a monolithic integrated circuit that Included all of the control circuits necessary for a pulse width modulating regulator. There is a voltage reference, an error amplifier, a pulse width modulator, an oscillator, an under-voltage lockout, a soft start circuit, and output drivers in the chip.
UC3525 Pinout
UC3525 Pin Configuration
| Pin No | Pin Name | Description |
|---|---|---|
| 1 | INV | Inverting Pin |
| 2 | N-INV | Non-Inverting Pin |
| 3 | SYNC | Synchronization Pin |
| 4 | OSC OUT | Oscillator Output Pin |
| 5 | CT | Capacitor Timing Pin |
| 6 | RT | Resistor Timing Pin |
| 7 | DISCH | Discharge Pin |
| 8 | SOFT-START | Soft-Start Pin |
| 9 | COMP: | Compensation Pin |
| 10 | SHUTDOWN | Shutdown Pin |
| 11 | OUTPUT A | Output Pin A |
| 12 | GND | Ground Pin |
| 13 | VCC | Supply Voltage Pin |
| 14 | OUTPUT B | Output Pin B |
| 15 | +Vin | Positive Input Voltage |
| 16 | Vref | Voltage Reference Pin |
UC3525 Features
- 5V ± 1% Reference
- Oscillator Sync terminal
- Internal Soft Start
- Deadtime Control
- Under-Voltage Lockout
You can download this datasheet for UC3525 Switch-Mode Power Supply Controller – Datasheet from the link given below:
