The UA9637AC is a dual differential line receiver designed to meet ANSI Standards EIA/TIA-422-B and EIA/TIA-423-B. The line receiver utilizes Schottky circuitry and has TTL-compatible outputs. The inputs are compatible with either a single-ended or … Read more
SN75183 dual differential line driver is designed to provide differential output signals with high current capability for driving balanced lines, such as twisted pairs, at normal line impedances without high power dissipation. The device can … Read more
The SN75182 dual differential line receivers are designed to sense small differential signals in the presence of large common-mode noise. The device gives TTL-compatible output signals as a function of the polarity of the differential … Read more
The SN75176B differential bus transceiver is an integrated circuit designed for bidirectional data communication on multipoint bus transmission lines. The SN75176B combines a 3-state differential line driver and a differential input line receiver, both of … Read more
The SN75175 is a monolithic quad differential line receiver with three-state outputs. The device is optimized for balanced multipoint bus transmission at rates up to 10 megabits per second. It also features high input impedance, … Read more
The SN75174 is a monolithic quadruple differential line driver with 3-state outputs. The device is optimized for balanced multipoint bus transmission at rates up to 4 megabaud. Each driver features wide positive and negative common-mode … Read more
The SN75173 is a monolithic quadruple differential line receiver with 3-state outputs. The standard is balanced for multipoint bus transmission at rates up to 10 megabits per second. The four receivers share two OR enable … Read more
The SN75172 is a monolithic quadruple differential line driver with 3-state outputs. The device is optimized for balanced multipoint bus transmission at rates of up to 4 megabaud. Each driver features wide positive and negative … Read more
The SN75158 is a dual differential line driver designed to satisfy the requirements set interface specifications. The outputs provide complementary signals with high-current capability for driving balanced lines, such as twisted pairs, at normal line … Read more
75118 Differential Line Transceiver integrated circuit is designed for use in interfacing between TTL-type digital systems and differential data-transmission lines. This is especially useful for party-line (data-bus) applications. Each of the circuit types combines in … Read more
26LS32 Receiver features four independent receiver chains which comply with EIA Standards for the Electrical Characteristics of Balanced/Unbalanced Voltage Digital Interface Circuits. Receiver outputs are, three–state structures which are forced to a high impedance state … Read more
The DS26LS31 is a quad differential line driver designed for digital data transmission over balanced lines. The DS26LS31 meets all the requirements of EIA Standard RS-422 and Federal Standard 1020. It is designed to provide … Read more
26LS33 is quadruple differential line receivers for balanced and unbalanced digital data transmission. The enable function is common to all four receivers and offers a choice of active-high or active-low input. The 3-state outputs permit … Read more
The 26LS30 Dual Differential RS422 RS423 Line Driver is a low-power Schottky set of line drivers which can be configured as two differential drivers which comply with EIA−422−A standards, or as four single−ended drivers which … Read more