The UA9637AC is a dual differential line receiver designed to meet ANSI Standards EIA/TIA-422-B and EIA/TIA-423-B. The line receiver utilizes Schottky circuitry and has TTL-compatible outputs. The inputs are compatible with either a single-ended or … Read more
MC3486 Quad Line Receiver, Three-State features four Independent receiver chains which comply with ELA Standards for the Electrical Characteristics Of Balanced/unbalanced Interface Circuit. A PNP device buffers each output control pin to assure minimum loading … Read more
The MC1489 monolithic quad line receiver is designed to interface data terminal equipment with data communications equipment in conformance with the specifications of EIA Standard No. EIA–232. MC1489 Pinout MC1489 Pin Configuration Pin No Pin … Read more
The DS14C89 Quad CMOS Line Receiver (RS232), pin-for-pin compatible with is receiver designed to interface data terminal equipment (DTE) with data circuit-terminating equipment (DCE). The device translate levels conforming to EIA-232E and CCITT V.28 standards … Read more
The DS1489 Quad Line Receiver (RS232) receiver is designed to interface data terminal equipment (DTE) with data circuit-terminating equipment (DCE). The device is translate levels conforming to EIA-232E and CCITT V.28 standards to TTL/CMOS logic … Read more
75189 Quad Line Receiver RS232 is a monolithic low-power Schottky quadruple line receiver designed to satisfy the requirements of the standard interface between data terminal equipment and data-communication equipment. A separate response-control (CONT) terminal is … Read more
The SN75182 dual differential line receivers are designed to sense small differential signals in the presence of large common-mode noise. The device gives TTL-compatible output signals as a function of the polarity of the differential … Read more
The SN75175 is a monolithic quad differential line receiver with three-state outputs. The device is optimized for balanced multipoint bus transmission at rates up to 10 megabits per second. It also features high input impedance, … Read more
The SN75173 is a monolithic quadruple differential line receiver with 3-state outputs. The standard is balanced for multipoint bus transmission at rates up to 10 megabits per second. The four receivers share two OR enable … Read more
The SN75154 is a monolithic low-power Schottky line receiver designed to satisfy the requirements of the standard interface between data terminal equipment and data communication equipment. Other applications are for relatively short, single-line, point-to-point data … Read more
SN75110A dual line drivers have improved output current regulation with supply-voltage and temperature variations. In addition, the higher current of the SN75112 (27 mA) allows data to be transmitted over longer lines. This driver offers … Read more
75107 Dual Line Receiver is TTL-compatible, high-speed line receiver. Each is a monolithic dual circuit featuring two independent channels. 75107 is designed for general use, as well as for such specific applications as data comparators … Read more
26LS32 Receiver features four independent receiver chains which comply with EIA Standards for the Electrical Characteristics of Balanced/Unbalanced Voltage Digital Interface Circuits. Receiver outputs are, three–state structures which are forced to a high impedance state … Read more
26LS33 is quadruple differential line receivers for balanced and unbalanced digital data transmission. The enable function is common to all four receivers and offers a choice of active-high or active-low input. The 3-state outputs permit … Read more