The TLC549CP is CMOS analog-to-digital converter (ADC) integrated circuits built around an 8-bit switched-capacitor successive-approximation ADC. These devices are designed for serial interface with a microprocessor or peripheral through a 3-state data output and an ... Read moreRead more
The TDA7052 is a mono output amplifier in an 8-lead dual-in-line (DIL) plastic package. The device is designed for battery-fed portable audio applications TDA7052 Pinout TDA7052 Pin Configuration Pin No Pin Name Description 1 VP ... Read moreRead more
LM2901 consists of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. The IC basically offers a low-cost high-performance solution to conventional design issues ... Read moreRead more
The BDX53C is silicon epitaxial-base NPN power transistors in monolithic Darlington configuration and are mounted in Jedec TO-220 plastic package. They are intended for use in hammer drivers, audio amplifiers and other medium power linear ... Read moreRead more
The LM3909 is a monolithic oscillator specifically designed to flash Light Emitting Diodes. By using the timing capacitor for voltage boost, it delivers pulses of 2 or more volts to the LED while operating on ... Read moreRead more
The BD439 is silicon epitaxial-base NPN power transistors in Jedec SOT-32 plastic package, intended for use in power linear and switching applications Power Transistor? Transistors are three-terminal semiconductor electronic devices that can be used as ... Read moreRead more
74LS256 belongs to the 74XXYY IC series. 74LS256 is a Dual 4-Bit Addressable Latch with common control inputs; these include two Address inputs (A0, A1), an active LOW Enable input (E), and an active LOW ... Read moreRead more
The LM330 5V 3-terminal positive voltage regulator features the ability to source 150 mA of output current with an input-output differential of 0.6V or less. Familiar regulator features such as current limit and thermal overload ... Read moreRead more
