Introduction Amplifier circuits play a crucial role in many electronic systems, from boosting signals in audio equipment to amplifying signals in communication systems. One of the most popular options for building amplifier circuits is the … Read more
The 81C55 has 2k-bit static RAM (256 bytes) with parallel I/O ports and a timer. It uses silicon gate CMOS technology and consumes a standby current of 100 microamperes, maximum, while the chip is not … Read more
The SST27SF020 is a 256K x8 CMOS, Many-Time Programmable (MTP) low-cost flash, manufactured with SST’s proprietary, high-performance Super Flash technology. The split-gate cell design and thick oxide tunneling injector attain better reliability and manufacturability compared … Read more
The SST27SF512 is 32K x8 / 64K x8 / 128K x8 / 256K x8 CMOS, Many-Time Programmable (MTP) low-cost flash, manufactured with SST’s proprietary, high-performance SuperFlash technology. The split-gate cell design and thick oxide tunneling … Read more
The SST27SF010 is a 32K x8 / 64K x8 / 128K x8 / 256K x8 CMOS, Many-Time Programmable (MTP) low-cost flash, manufactured with SST’s proprietary,high-performance SuperFlash technology. The split-gate cell design and thick oxide tunneling … Read more
The M27C1024 is a 1 Mbit EPROM offered in the two ranges UV (ultra violet erase) and OTP (one-time programmable). It is ideally suited for microprocessor systems requiring large data or program storage and is … Read more
27F256 CMOS flash memory offers the most cost-effective and reliable alternative for updatable non-volatile memory. The 27F256 adds electrical chip-erasure and reprogramming to familiar EPROM technology. Memory contents can be erased and reprogrammed: in a … Read more
The M27C160 is a 16 Mbit EPROM offered in the two ranges UV (ultra violet erase) and OTP (one-time programmable). It is ideally suited for microprocessor systems requiring large data or program storage and is … Read more
The AT27C080 chip is a low-power, high-performance 8,388,608-bit one-time programmable read-only memory (OTP EPROM) organized as 1M by 8 bits. The AT27C080 requires only one 5V power supply in normal read mode operation. Any byte … Read more
The 29C020 is a 5-volt-only in-system Flash programmable and erasable read-only memory (PEROM). Its 2 megabits of memory are organized as 262,144 bytes. The device offers access times to 90 ns with power dissipation of … Read more
The 29C256 is a five-volt-only in-system Flash programmable and erasable read-only memory (PEROM). Its 256K of memory is organized as 32,768 words by 8 bits. The device offers access times to 70 ns with a … Read more
The 29F040B is a 4 Mbit, 5.0 volt-only Flash memory organized as 524,288 Kbytes of 8 bits each. The 512 Kbytes of data are divided into eight sectors of 64 Kbytes each for flexible erase … Read more
The 29C040A is a 5-volt-only in-system Flash Programmable and Erasable Read Only Memory (PEROM). Its 4 megabits of memory are organized as 524,288 words by 8 bits. The device offers access times up to 100 … Read more
The 29C512 is a 5-volt only in-system Flash programmable and erasable read-only memory (PEROM). Its 512K of memory is organized as 65,536 words by 8 bits. The device offers access times to 70 ns with … Read more
The 29C256 is a five-volt-only in-system Flash programmable and erasable read-only memory (PEROM). Its 256K of memory is organized as 32,768 words by 8 bits. The device offers access times to 70 ns with a … Read more
The 29C010A is a 5-volt-only in-system Flash programmable and erasable read-only memory (PEROM). Its 1 megabit of memory is organized as 131,072 words by 8 bits. The device offers access times to 70 ns with … Read more