The CA3080 is Gateable-Gain Blocks which utilize the unique operational-transconductance amplifier. Applications of the CA3080 High-Performance Operational Transconductance Amplifier. The CA3080 has differential input and a single-ended, push-pull, class-A output. In addition, these types have … Read more
The ADC0809CCN data acquisition component is a monolithic CMOS device with an 8-bit analog-to-digital converter, 8-channel multiplexer and microprocessor compatible control logic. The 8-bit A/D converter uses successive approximation as the conversion technique. The converter … Read more
The ADC0817CCN data acquisition component is a monolithic CMOS device with an 8-bit analog-to-digital converter, 16-channel multiplexer and microprocessor compatible control logic. The 8-bit A/D converter uses successive approximation as the conversion technique. The converter … Read more
The ADC0844 is CMOS 8-bit successive approximation A/D converters with versatile analog input multiplexers. The 4-channel or 8-channel multiplexers can be software configured for single-ended, differential or pseudo-differential modes of operation. The differential mode provides … Read more
The ADC0838CCN series are 8-bit successive approximation A/D converters with a serial I/O and configurable input multiplexers with up to 8 channels. The serial I/O is configured to comply with the NSC MICROWIRE™ serial data … Read more
The TLC540IN is CMOS A/D converters built around an 8-bit switched capacitor successive-approximation A/D converters. They are designed for serial interface to a microprocessor or peripheral via a 3-state output with up to four control … Read more
The TLC1543 is CMOS 10-bit switched-capacitor successive-approximation analog-to-digital converters. These devices have three inputs and a 3-state output [chip select (CS), input-output clock (I/O CLOCK), address input (ADDRESS), and data output (DATA OUT)] that provide … Read more
CD4053 belongs to the CD4000 IC series. The CD4053 is an analog multiplexers/demultiplexers are digitally controlled analog switches having low “ON” impedance and very low “OFF” leakage currents. Control of analog signals up to 15Vp-p … Read more
The CD4051 is a part of CD4000 IC series, made by using the complementary MOS (CMOS) technology. CD4051 is a single 8-channel multiplexer having three binary control inputs. A, B, and C, and an inhibit … Read more
The CD4052 analog multiplexers/demultiplexers are digitally controlled analog switches having a low “ON” impedance and very low “OFF” leakage currents. Control of analog signals up to 15Vp-p can be achieved by digital signal amplitudes of … Read more
CD4067 is a part of the CD4000 IC series. CD4067 CMOS analog multiplexers/DE multiplexers are digitally controlled analog switches having low ON impedance, low OFF leakage current, and internal address decoding. The CD4067 is a … Read more
CD4512 is a part of the CD4000 IC series. The CD4512 IC is an 8-channel data selector. The IC circuitry is housed within a CMOS circuit constructed using N and P – channel transistors. Data … Read more
The 74LS352 is a very high-speed Dual 4-input Multiplexer with Common Select inputs and individual enable inputs for each section. It can select two bits of data from four sources. The two buffered outputs present … Read more
The 74LS258 Multiplexer IC is designed to multiplex signals from four-bit data sources to four-output data lines in bus-organized systems. The IC is designed to operate over a temperature range of 0 to 70°C. The … Read more
74LS251 is a high speed 8-Input Digital Multiplexer. These ICs contain full on-chip binary decoding to select one of eight data sources and feature a strobe-controlled three-state output. The strobe must be at a low … Read more
74LS157 Quad 2 To 1 Line Multiplexer is a part of the 74XXYY IC series. The 74LS150 IC has a wide range of working voltage, a wide range of working conditions, and directly interfaces with … Read more