OP495 is a Quad Rail-to-Rail Op-Amp IC that is specified over the extended industrial (–40°C to +125°C) temperature range. OP495s are available in 14-pin plastic and SO-16 surface-mount packages. The IC offers a wide variety of features such as thermal overload protection, ESD barring, and high noise immunity.
Operational Amplifier
An operational amplifier is one of the basic building blocks for analog circuits, An operational amplifier takes in differential voltage input and produces a single-ended voltage output. The basic purpose of employing an operational amplifier in an analog circuit is to perform the function of signal amplification: The process of boosting an electrical signal of low strength to a level of higher amplitude. Op-amps also function as a filter of the input signal; meaning that, an operational amplifier is able to extract the signal with the target frequency. Op-amps can be divided into two fundamental parts:
- Precision Op-amps
- Differential Op-amps
OP495 Pinout
OP495 Pin Configuration
| Pin No | Pin Name | Description |
|---|---|---|
| 1 | OUT A | Output Of Amplifier A |
| 2 | INV-INPUT A | Inverting Input Of Amplifier A |
| 3 | NON-INV-INPUT A | Non Inverting Input Of Amplifier A |
| 4 | V+ | Positive Power Supply |
| 5 | NON-INV-INPUT B | Non Inverting Input Of Amplifier B |
| 6 | INV-INPUT B | Inverting Input Of Amplifier B |
| 7 | OUT B | Output Of Amplifier B |
| 8 | OUT C | Output Of Amplifier C |
| 9 | INV-INPUT C | Inverting Input Of Amplifier C |
| 10 | NON-INV-INPUT C | Non Inverting Input Of Amplifier C |
| 11 | V- | Negative Power Supply |
| 12 | NON-INV-INPUT D | Non Inverting Input Of Amplifier D |
| 13 | INV-INPUT D | Inverting Input Of Amplifier D |
| 14 | OUT D | Output Of Amplifier D |
OP495 Features
- Rail-to-Rail Output Swing
- Single-Supply Operation: +3 V to +36 V
- Low Offset Voltage: 300 mV
- Gain Bandwidth Product: 75 kHz
- High Open-Loop Gain: 1000 V/mV
- Unity-Gain Stable
- Low Supply Current/Per Amplifier: 150 mA max
Application
- Battery Operated Instrumentation
- Servo Amplifiers
- Actuator Drives
- Sensor Conditioners
- Power Supply Control
OP495 Datasheet
You can download this datasheet for OP495GP Quad Rail-to-Rail Op-Amp from the link given below:
See Also CD4512 8-Channel Data Selector – Datasheet | CD4543 BCD to 7-Segment Decoder – Datasheet | CD4584 Hex Schmitt Trigger – Datasheet
