The SST27SF020 is a 256K x8 CMOS, Many-Time Programmable (MTP) low-cost flash, manufactured with SST’s proprietary, high-performance Super Flash technology. The split-gate cell design and thick oxide tunneling injector attain better reliability and manufacturability compared … Read more
The SST27SF512 is 32K x8 / 64K x8 / 128K x8 / 256K x8 CMOS, Many-Time Programmable (MTP) low-cost flash, manufactured with SST’s proprietary, high-performance SuperFlash technology. The split-gate cell design and thick oxide tunneling … Read more
The SST27SF010 is a 32K x8 / 64K x8 / 128K x8 / 256K x8 CMOS, Many-Time Programmable (MTP) low-cost flash, manufactured with SST’s proprietary,high-performance SuperFlash technology. The split-gate cell design and thick oxide tunneling … Read more
27F256 CMOS flash memory offers the most cost-effective and reliable alternative for updatable non-volatile memory. The 27F256 adds electrical chip-erasure and reprogramming to familiar EPROM technology. Memory contents can be erased and reprogrammed: in a … Read more
The 29C020 is a 5-volt-only in-system Flash programmable and erasable read-only memory (PEROM). Its 2 megabits of memory are organized as 262,144 bytes. The device offers access times to 90 ns with power dissipation of … Read more
The 29C256 is a five-volt-only in-system Flash programmable and erasable read-only memory (PEROM). Its 256K of memory is organized as 32,768 words by 8 bits. The device offers access times to 70 ns with a … Read more
The SST49LF080A flash memory device is designed to interface with the LPC bus for PC and Internet Appliance application in compliance with Intel Low Pin Count (LPC) Interface Specification 1.0. Two interface modes are supported: … Read more
The SST49LF160C flash memory device is designed to interface with host controllers (chipsets) that support a low-pin-count (LPC) interface for system firmware applications. The SST49LF160C device complies with the LPC Interface Specification. The LPC interface … Read more
The 29F040B is a 4 Mbit, 5.0 volt-only Flash memory organized as 524,288 Kbytes of 8 bits each. The 512 Kbytes of data are divided into eight sectors of 64 Kbytes each for flexible erase … Read more
The 29C040A is a 5-volt-only in-system Flash Programmable and Erasable Read Only Memory (PEROM). Its 4 megabits of memory are organized as 524,288 words by 8 bits. The device offers access times up to 100 … Read more
The 29C512 is a 5-volt only in-system Flash programmable and erasable read-only memory (PEROM). Its 512K of memory is organized as 65,536 words by 8 bits. The device offers access times to 70 ns with … Read more
The 29C256 is a five-volt-only in-system Flash programmable and erasable read-only memory (PEROM). Its 256K of memory is organized as 32,768 words by 8 bits. The device offers access times to 70 ns with a … Read more
The 29C010A is a 5-volt-only in-system Flash programmable and erasable read-only memory (PEROM). Its 1 megabit of memory is organized as 131,072 words by 8 bits. The device offers access times to 70 ns with … Read more
The 29C020 is a 5-volt-only in-system Flash programmable and erasable read-only memory (PEROM). Its 2 megabits of memory are organized as 262,144 bytes. The device offers access times to 90 ns with power dissipation of … Read more
The 28F256 is a 256 K Flash memory organized as 32 Kbytes of 8 bits each. AMD’s Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The 28F256 is packaged in … Read more
The 28F010 CMOS flash memory offers the most cost-effective and reliable alternative for reading/write random access nonvolatile memory. The 28F010 adds electrical chip-erasure and reprogramming to familiar EPROM technology. Memory contents can be rewritten: in … Read more